Instrument Panel Cluster (IPC) - Replacement

INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the IP cluster trim plate.
3. Remove the 4 screws (1) which secure the instrument cluster (2).




4. Pull the cluster (1) forward in order to gain access to the electrical connectors (2).
5. Disconnect the 3 instrument cluster electrical connectors (2).
6. Remove the instrument cluster (1) from the vehicle.

INSTALLATION PROCEDURE




1. Connect the 3 instrument cluster electrical connectors (2).




2. Install the instrument cluster (2) to the instrument panel. Secure the cluster with the 4 screws (1).
3. Install the IP cluster trim plate.
4. Connect the negative battery cable.