Rear Door Lock Replacement (2 Door)

Rear Door Lock Replacement (2 Door)

Removal Procedure





1. Remove the endgate trim panel seal. Refer to Water Deflector Replacement (2 Door) (Water Deflector Replacement (2 Door))Water Deflector Replacement (4 Door) (Water Deflector Replacement (4 Door)) .
2. Open the endgate lock cylinder control rod retainer (3).
3. Remove the endgate lock cylinder control rod (4) from the endgate lock cylinder (2).




4. Open the endgate lock cylinder control rod retainer (2).
5. Remove the endgate lock cylinder control rod (1) from the endgate lock (3).




6. Remove the 3 screws which secure the endgate lock (1).
7. Remove the endgate lock (1) from the endgate panel (2).



Installation Procedure





1. Install the endgate lock (1) to the endgate panel (2). Secure the lock with the 3 screws.




2. Install the endgate lock cylinder control rod (1) to the endgate lock (3). Secure the rod by closing the endgate lock cylinder control rod retainer (2).




3. Install the endgate lock cylinder control rod (4) to the endgate lock cylinder (2). Secure the rod by closing the endgate lock cylinder control rod retainer (3).
4. Install the endgate trim panel seal. Refer to Water Deflector Replacement (2 Door) (Water Deflector Replacement (2 Door))Water Deflector Replacement (4 Door) (Water Deflector Replacement (4 Door)) .