Rear Floor Rear Trim Plate Replacement

Rear Floor Rear Trim Plate Replacement

Removal Procedure





1. Remove the 3 rear floor rear trim plate bolt covers (1).
2. Remove the 3 bolts (3) which secure the rear floor rear trim plate (2).
3. Remove the rear floor rear trim plate (2) by gently disengaging the plastic retainers.



Installation Procedure





1. Install the rear floor rear trim plate (2) to the vehicle. Ensure that the plastic retainers are fully engaged.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 3 bolts (3) which secure the rear floor rear trim plate (2).

Tighten the rear floor rear trim plate bolts to 10 N.m (89 lb in).

3. Install the 3 rear floor rear trim plate bolt covers (1).