Headliner Replacement - Front

Headlining Front Trim Panel Replacement

Removal Procedure

1. Remove the sunshades. Refer to Sunshade Replacement (Service and Repair) .
2. Remove the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Windshield Garnish Molding Replacement) in Stationary Windows.
3. Remove the front door opening upper frame garnish molding. Refer to Front Side Door Opening Frame Garnish Molding (Front Side Door Opening Frame Garnish Molding Replacement) .
4. Remove the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement (Upper Pillar Garnish Molding Replacement) .
5. Remove the dome lamp. Refer to Dome Lamp Replacement (All except Luxury) in Lighting Systems.
6. Remove the rear heater controls. Refer to Control Assembly Replacement in Heating and Ventilation (non-A/C).




7. Remove the front headliner from the retaining clips at the rear edge of the headliner.
8. Remove the front headliner from the vehicle.



Installation Procedure





1. Install the front headliner to the vehicle.
2. Install the front headliner to the retaining clips at the rear edge of the headliner.
3. Install the rear heater controls. Refer to Control Assembly Replacement in Heating and Ventilation (non-A/C).
4. Install the dome lamp. Refer to Dome Lamp Replacement (All except Luxury) Dome Lamp Replacement in Lighting Systems.
5. Install the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement (Upper Pillar Garnish Molding Replacement) .
6. Install the front door opening upper frame garnish molding. Refer to Front Side Door Opening Frame Garnish Molding (Front Side Door Opening Frame Garnish Molding Replacement) .
7. Install the windshield garnish molding. Refer toWindshield Garnish Molding Replacement (Windshield Garnish Molding Replacement) .
8. Install the sunshades. Refer to Sunshade Replacement (Service and Repair) .