Rear Door Outside Handle and License Pocket Replacement

Rear Door Outside Handle and License Pocket Replacement

Removal Procedure





1. Remove the right side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair
2. Remove the lock rods from the lock.
3. Remove the nuts from the right side rear door outside door handle and license pocket assembly.
4. Remove the right side rear door outside door handle and license pocket assembly, which includes the anti-theft shield, from the right rear door.



Installation Procedure





1. Install the right side rear door outside door handle and license pocket assembly to the right rear door.
2. Install the anti-theft shield between the right side rear door outside door handle and license pocket and the right rear door.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the nuts that retain the right side rear door outside door handle and license pocket assembly.

Tighten the right side rear door outside door handle and license pocket assembly retaining nuts to 11 N.m (97 lb in).

4. Install the lock rods to the lock.
5. Install the right side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair