Trim Covers, Shift Lever Seal - Disassemble

DISASSEMBLY PROCEDURE

- Tools Required
- J 41352 Modular Column Holding Fixture





1. Put the steering column and J 41352 into a vise.
2. Inspect the steering column for accident damage. Refer to Steering Column Accident Damage Inspection - Off Vehicle





3. Remove the 2 pan head tapping screws (1) from the lower shroud (2).
4. Remove the lower shroud from the upper shroud.
5. Tilt the lower shroud down.





6. Slide the lower shroud backward in order to disengage the locking tabs.





7. Remove the shroud protector (1) from the lower shroud (2).





8. Remove the 2 TORX(R) head screws (1) from the upper shroud (2).
9. Remove the upper shroud (2) from the steering column.