Heater Water Shutoff Valve Inlet Hose Replacement

Heater Water Shutoff Valve Inlet Hose Replacement

Special Tools

BO-38185 - Hose Clamp Pliers

For equivalent regional tools, refer to Special Tools Tools and Equipment.

Removal Procedure

Note:
Replace corroded hose clamps and brackets.

1. Drain the cooling system. Refer to Drive Motor Generator Power Inverter Module Cooling System Draining and Filling Drive Motor Generator Power Inverter Module Cooling System Draining and Filling.

2. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement Air Cleaner Resonator Outlet Duct Replacement.





3. Disconnect the heater water shutoff valve inlet hose quick connect fitting (1) at the heater water shutoff valve.

4. Remove the heater water shutoff valve inlet hose (2) from the heater water shutoff valve.





5. Remove the heater water shutoff valve inlet hose clamp (1) at engine using BO-38185 - pliers.

6. Remove the heater water shutoff valve inlet hose (2) from engine.

7. Remove the heater water shutoff valve inlet hose from the vehicle.

Installation Procedure





1. Install the heater water shutoff valve inlet hose to the vehicle.

2. Install the heater water shutoff valve inlet hose (2) to the engine.

3. Install the heater water shutoff valve inlet hose clamp (1) at the engine using BO-38185 - pliers.





4. Install the heater water shutoff valve inlet hose (2) to the heater water shutoff valve.

5. Connect the heater water shutoff valve inlet hose quick connect fitting (1) at heater water shutoff valve.

6. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement Air Cleaner Resonator Outlet Duct Replacement.

7. Fill the cooling system. Refer to Drive Motor Generator Power Inverter Module Cooling System Draining and Filling Drive Motor Generator Power Inverter Module Cooling System Draining and Filling.