Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn

Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn

Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn

The Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn procedure must be completed when the following components are replaced:

* Hybrid/EV Powertrain Control Module 2

* Hybrid/EV Battery Pack Coolant Control Solenoid Valve

The Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn procedure can be completed with a scan tool using the following steps:

1. Install the scan tool to the data link connector.

2. Vehicle in Service Mode, engine OFF.

3. Select Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn in the Hybrid/EV Powertrain Control Module 2 Control Functions list.

4. Follow the scan tool directions to complete the procedure.

5. Clear any DTCs that may be set.