Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

1. Remove the battery tray. Refer to Battery Tray Replacement Service and Repair.

2. Install the engine support fixture. Refer to Engine Support Fixture Service and Repair.





3. Remove and DISCARD the left transmission mount to bracket bolts (1).

4. Remove the left transmission mount to body bolts (2).

5. Remove the left transmission mount to body nut (3).

6. Remove the left transmission mount (4) from the vehicle.

Installation Procedure





1. Install the left transmission mount (4) to the vehicle.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the transmission mount to body bolts (2) and tighten to 58 Nm (43 lb ft).

3. Install the left transmission mount to body nut (3) and tighten to 58 Nm (43 lb ft).

4. Install the NEW left transmission mount to transmission bolts (1) and tighten to 50 Nm (37 lb ft) plus 60-75 degrees.

5. Remove the engine support fixture. Refer to Engine Support Fixture Service and Repair.

6. Install the battery tray. Refer to Battery Tray Replacement Service and Repair.