Charge Air Cooler Inlet Air Hose Replacement

Charge Air Cooler Inlet Air Hose Replacement

Removal Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.

2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .





3. Loosen the charge air cooler inlet air pipe clamp (1) at the turbocharger outlet.





4. Unclip the retainer spring (1) at the charge air cooler inlet.

5. Remove the charge air cooler inlet air hose (2) from the charge air cooler (3) and remove the hose from the vehicle.

Installation Procedure





1. Install the charge air cooler inlet air hose (2) to charge air cooler (3).

2. Clip the in retainer spring (1).





3. Install the charge air cooler inlet air pipe to the turbocharger outlet.

Caution:
Refer to Fastener Caution Fastener Caution.

4. Tighten the clamp (1).

5. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .

6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.