Hood Insulator / Pad: Service and Repair

Hood Insulator Replacement

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

1. Raise the hood.




2. Remove the hood insulator push-in retainers (1) from the hood using the J 38778 .
3. Slide the hood insulator rearward. Remove the hood insulator (2).

Installation Procedure




1. Position the hood insulator (2) under the tabs that are located at the front and center of the hood.
2. Install the hood insulator push-in retainers (1) until fully seated.
3. Close the hood.