Rear Bumper Fascia Replacement (Coupe)

Rear Bumper Fascia Replacement (Coupe)












2.Remove the license lamp. Refer to Rear License Plate Lamp Replacement .

3.Remove the rear wheel liners. Refer to Rear Wheelhouse Panel Liner Replacement .

1Rear Bumper Fascia - Upper Retainer (Qty: 4)

2Rear Bumper Fascia Tail Lamp Pocket Screw (Qty: 4)
Caution:Refer to Fastener Caution .
Tighten 2 N �m (18 lb in)

3Rear Bumper Fascia (Inside wheel well) Bolt (Qty: 2)Tighten 2.5 N �m (22 lb in)

4Rear Bumper Fascia Retainer (Qty: 4)

5Rear Bumper Fascia
Tip Pull the sides of the rear fascia at the quarter panel to release the fascia from the brackets.