Rear Suspension

Wheel Bearing/Hub Replacement - Rear

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Remove the wheel. Refer to Tire and Wheel Removal and Installation Service and Repair.
3. On vehicles equipped with rear drum brakes, remove the rear brake drum detent screw and brake drum. Refer to Drum Brake Adjustment Adjustments.
4. On vehicles equipped with rear disc brakes, remove the rear brake caliper and rear brake disc. Refer to Rear Brake Caliper Replacement Rear Brake Caliper Replacement.




5. Remove the hub bolts and hub assembly.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice.

1. Install the hub assembly.

Tighten the hub assembly bolts to 65 Nm (48 lb ft).

2. Install the hub nut.
3. On vehicles equipped with rear disc brakes, install the rear brake disc and rear brake caliper. Refer to Rear Brake Caliper Replacement Rear Brake Caliper Replacement.
4. On vehicles equipped with rear drum brakes, install the rear brake drum and the brake drum detent screw. Refer to Drum Brake Adjustment Adjustments.
5. Install the wheel. Refer to Tire and Wheel Removal and Installation Service and Repair.
6. Lower the vehicle.