10. Brake F, Slotted Nut Removal

Brake F, Slotted Nut Removal

Tools Required

DT 46474 (DW260-060) Brake F Cup Spring Compressor





Caution: Refer to Safety Glasses Caution Safety Glasses Caution.

1. Remove the side shaft. Refer to Side Shaft Removal Side Shaft Removal.
2. Remove the disc set.




3. Remove the brake F inner disc carrier.




4. Install DT 46474 (1) and remove the brake F split stop ring.
5. Remove DT 46474 (1).




6. Remove the cup spring.




7. Release the piston F by applying compressed air to the bore.





Important: Remove the plate by pressing the plate upward from beneath.


8. Remove piston F and remove the bearing plate with the spur gear.