Automatic Transmission Fluid Pan and Gasket Installation

Automatic Transmission Fluid Pan and Gasket Installation

Tools Required

DT 46475 (DW260-070) Auto Transaxle Oil Plug Remover/Installer





Notice: Refer to Fastener Notice Fastener Notice.

1. Install the oil pan and the oil pan gasket and the bolts.

Tighten the bolts to 6 Nm (53 lb in).




2. Install the oil cooler inlet and outlet pipes. Refer to Transmission Fluid Cooler Hose/Pipe Replacement ZF 4HP 16 - Automatic Transmission.




3. Use DT 46475 (1) to install the transaxle fluid drain plug.
4. Install the engine cover. Refer to Engine Cover Replacement .
5. Refill the transaxle fluid. Refer to Transmission Fluid Level Inspection Transmission Fluid Level Inspection.
6. Connect the negative battery cable.