Front Suspension

Stabilizer Shaft Link Replacement

Removal Procedure




1. Remove the stabilizer shaft-to-stabilizer link nut.
2. Remove the stabilizer link-to-strut assembly nut.
3. Remove the stabilizer link.

Installation Procedure




1. Install the stabilizer link.
Notice: Refer to Fastener Notice Fastener Notice.

2. Install the stabilizer link-to-strut assembly nut.

Tighten the stabilizer shaft-to-stabilizer link nut to 47 Nm (35 lb ft).

3. Install the stabilizer shaft-to-stabilizer link nut.

Tighten the stabilizer shaft-to-stabilizer link nut to 47 Nm (35 lb ft).