SSPS Warning Lamp Inoperative

SSPS Warning Lamp Inoperative

Circuit Description

The speed sensitive power steering (SSPS) control module controls the operation of the SSPS warning lamp. When the ignition switch is turned to the ON position, the SSPS control module turns ON the SSPS warning lamp for 3 seconds for a bulb check. Whenever a malfunction is detected within the variable effort steering (VES) system, the SSPS control module turns ON the SSPS warning lamp, notifying the driver that VES needs to be serviced.

Diagnostic Aids

Thoroughly inspect the wiring and the connectors. An incomplete inspection of the wiring and the connectors may result in a misdiagnosis, causing a part replacement with the reappearance of the malfunction.

The following are possible causes of the malfunction:

* A open in the SSPS warning lamp control circuit
* An internal SSPS control module malfunction
* An internal instrument cluster malfunction
* An inoperative lamp bulb

If an intermittent malfunction exists, refer to Testing for Intermittent Conditions and Poor Connections Testing for Intermittent Conditions and Poor Connections.

Test Description

The number below refers to the step number on the diagnostic table.
3. Determines if the malfunction is caused by an internal SSPS control module malfunction.