Shoulder Belt Replacement - Rear (Four Door)

Shoulder Belt Replacement - Rear (Four Door)

Removal Procedure




1. Remove the back shelf panel. Refer to Rear Window Shelf Trim Panel Replacement Rear Window Shelf Trim Panel Replacement.
2. Remove the rear seat belt retractor securing bolts (LH, Center, RH) from the back panel.




3. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement Rear Seat Cushion Replacement.




4. Remove the floor seat belt anchor bolts.
5. Remove the seat belt.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice.

1. Install the floor seat belt anchor bolts.

Tighten the floor seat belt anchor bolt to 38 Nm (28 lb ft).




2. Install the rear seat belt retractor bolts (LH, Center, RH) on the back panel.

Tighten the rear seat belt retractor bolts to 38 Nm (28 lb ft).




3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement Rear Seat Cushion Replacement.
4. Install the back shelf panel. Refer to Rear Window Shelf Trim Panel Replacement Rear Window Shelf Trim Panel Replacement.