Cowl Moulding / Trim: Service and Repair

Air Inlet Grille Panel Replacement

Removal Procedure




1. Raise the hood and support it with the hood prop.
2. Remove the weatherstrip.
3. Remove the wiper arms. Refer to Wiper Arm Replacement Wiper Arm Replacement.
4. Remove the air inlet grille panel screws and the 2-piece grille.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice.

1. Install the 2-piece grille and the air inlet grille screws.

Tighten the air inlet grille screws to 4 Nm (35 lb in).

2. Remove the wiper arms. Refer to Wiper Arm Replacement Wiper Arm Replacement.
3. Install the weatherstrip.