Sun Visor: Service and Repair

Sunshade Replacement

Removal Procedure




1. Remove the screws and the sun visor from the headliner.
2. Disconnect the vanity mirror electrical connector.
3. Remove the screw and the sun visor support from the headliner.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice.

1. Install the sun visor support to the headliner with the screw.

Tighten the sun visor support screw to 1.5 Nm (13 lb in).

2. Connect the vanity mirror electrical connector.
3. Install the sun visor to the headliner with the screws.

Tighten the sun visor screws to 4 Nm (35 lb in).