Trim Panel Replacement - Front Door

Trim Panel Replacement - Front Door

Tools Required

J 21104-B Weatherstrip Remover Universal

Removal Procedure




1. Lower the front window.
2. Pry off the inside door handle trim bezel.
3. Remove the rear deck lid remote switch and the power window/mirror control switch.




4. Disconnect the electrical connectors.
5. Remove the door trim panel screws.
6. Pry off the trim panel using the J 21104-B .

Installation Procedure




1. Install the trim panel.
2. Connect the electrical connectors.
3. Install the rear deck lid remote switch and the power window/mirror control switch.





Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

4. Install the door trim panel screws.

Tighten the door trim panel screws to 2.5 Nm (22 lb in).

5. Install the inside door handle trim bezel.
6. Raise the front window.