Shoulder Belt Replacement - Rear

Shoulder Belt Replacement - Rear

Removal Procedure




1. Remove the back shelf panel. Refer to Rear Window Shelf Trim Panel Replacement Service and Repair in Interior Trim.
2. Remove the rear seat belt retractor securing bolts (LH, Center, RH) from the back panel.




3. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement Service and Repair in Seats.




4. Remove the floor seat belt anchor bolts.
5. Remove the seat belt.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

1. Install the floor seat belt anchor bolts.

Tighten the floor seat belt anchor bolt to 38 Nm (28 lb ft).




2. Install the rear seat belt retractor bolts (LH, Center, RH) on the back panel.

Tighten the rear seat belt retractor bolts to 38 Nm (28 lb ft).




3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement Service and Repair in Seats.
4. Install the back shelf panel. Refer to Rear Window Shelf Trim Panel Replacement Service and Repair in Interior Trim.