Power Steering Pump Pulley Replacement

Power Steering Pump Pulley Replacement

Special Tools
* J 25033-C Pulley Installer
* J 25034-C Pulley Remover

Removal Procedure

1. Release the appropriate belt off the power steering pump pulley. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement (Air Conditioning Compressor and Power Steering Pump Belt Replacement) for the 3.6L (LY7) engine or Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement () for the 4.6L (LH2) engine.




2. Remove the power steering pump pulley using remover J 25034-C.

Installation Procedure




1. Install the power steering pump pulley using installer J 25033-C.




2. Ensure that the axial tolerance of the power steering pump pulley on the power steering pump is within 0.25 mm (0.010 in).
3. Install the appropriate belt on the power steering pump pulley. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement (Air Conditioning Compressor and Power Steering Pump Belt Replacement) for the 3.6L (LY7) engine or Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement () for the 4.6L (LH2) engine.