Instrument Cluster Replacement

Instrument Cluster Replacement

Removal Procedure

1. Remove the instrument panel cluster trim. Refer to Instrument Cluster Trim Panel Replacement (Service and Repair) .




2. Remove the 4 screws (1) securing the instrument panel cluster.
3. Disconnect the electrical connector.



Installation Procedure





1. Connect the electrical connector.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the 4 screws (1) securing the instrument panel cluster.

Tighten the screws (1) to 2 N.m (9 lb in).

3. Install the instrument panel cluster trim. Refer to Instrument Cluster Trim Panel Replacement (Service and Repair) .
4. Refer to Control Module References (Programming and Relearning) for programming and setup information.