Seats

Diagnostic Trouble Code Test:

Wiring Schematic:

CIRCUIT DESCRIPTION
The driver seat adjuster memory module monitors the voltage at terminals 1, 2 and 3 of the rear height seat adjuster actuator motor connector C4B. When the voltage value on these circuits is not within the specified value, the driver seat adjuster memory module will set DTC 17.

CONDITIONS FOR SETTING THE DTC
DTC 17 will set if:
^ the rear height seat adjuster actuator motor or its circuits are faulty.
^ the driver seat adjuster memory module is faulty.

ACTIONS TAKEN WHEN THE DTC SETS
DTC 17 will set and the rear height seat adjuster actuator motor will become disabled.

CONDITIONS FOR CLEARING THE DTC
DTC 17 will clear when the fault is no longer present.

DIAGNOSTIC AIDS
^ Check for mechanical bindings that may restrict the rear height seat adjuster actuator motor from operating properly.
^ Check for loose connections at the driver seat adjuster memory module.

TEST DESCRIPTION
The following numbers refer to the step numbers on the diagnostic table:
2. This step checks the potentiometer.
3. This step replaces the motor.
5. This step checks the motor.