Range Selector Lever Cable Adjustment

Range Selector Lever Cable Adjustment

Removal Procedure

Note:
Adjust the automatic transmission range selector cable while the transmission and the gear selector are in the Park position only. Failure to do so may cause miss-adjustment.

1. Set the park brake and chock the wheels.





2. Remove range selector lever cable adjust lock (1).

Installation Procedure

1. Verify the transmission range selector lever is in the park position.

2. Verify the transmission shift lever is in the park position.





3. Install the range selector lever cable adjust lock (1).

4. Check the transmission range selector lever in all gear selections for proper operation.