Intake Air Duct Replacement

Intake Air Duct Replacement

Removal Procedure

1. Remove the front bumper fascia center support. Refer to Front Bumper Fascia Center Support Replacement Service and Repair.





2. Remove the front intake air duct bolt (2).

3. Remove the front intake air duct (3) from the rear intake air duct (1).

Installation Procedure





1. Install the front intake air duct (3) to the rear intake air duct (1).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the front intake air duct bolt (2) and tighten to 5 Nm (44 lb in).

3. Install the front bumper fascia center support. Refer to Front Bumper Fascia Center Support Replacement Service and Repair.