AF40-6 (MDK) - Automatic Transmission

Range Selector Lever Cable Adjustment

This style cable does not require any adjustment. To reset the range selector cable after servicing perform the following procedure:

1. Release the locking tab to allow for adjustment.

2. Ensure that the shift lever and the shifter are in the Park position.

Note: Ensure that the locking tab on the shift cable is fully seated. In order to properly seat the locking tab, it may be necessary to use the aid of a tool. When properly seated, the top of the locking tab should be flush with the housing.

3. Secure the cable adjustment lock into place.