Transmission Front Mount Replacement

Transmission Front Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.





2. Remove the front transaxle mount through bolt (1).

3. Support the transmission with a suitable jack.





4. Remove and discard the three transaxle mount-to-transaxle attachment bolts (2).

5. Remove the transaxle mount (1) from the vehicle.

Installation Procedure





1. Install the transaxle mount (1).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the NEW transaxle mount bolts (2) and tighten to 100 Nm (74 lb ft).





3. Install the transaxle mount through bolt (1) and tighten to 105 Nm (77 lb ft).

4. Remove the jack from the transmission.

5. Lower the vehicle.