Power Brake Booster Vacuum Pipe Replacement (2.4L)

Power Brake Booster Vacuum Pipe Replacement (2.4L)

Removal Procedure

1. Turn the engine OFF.




2. Apply and release the brake pedal several times until the pedal becomes firm to deplete the power vacuum brake booster vacuum reserve.
3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement Service and Repair.
4. Disconnect the power brake booster vacuum pipe quick connect (1).




5. Release the power brake booster vacuum pipe clips (1).




6. Release the clamp (1) and remove the power brake booster vacuum pipe (2) from the intake manifold vacuum port.

Installation Procedure




1. Install the clamp (1) and install the power brake booster vacuum pipe (2) to the intake manifold vacuum port.




2. Install the power brake booster vacuum pipe to the clips (1).




3. Connect the power brake booster vacuum pipe quick connect (1).
4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement Service and Repair.