Power Brake Booster Vacuum Pipe Replacement

Power Brake Booster Vacuum Pipe Replacement (2.0L)

Removal Procedure

1. With the engine OFF, apply and release the brake pedal several times until the brake pedal becomes firm to deplete the power vacuum brake booster vacuum reserve.




2. Release the power brake booster vacuum pipe quick connect (1) from the power brake booster pump.
3. Remove the power brake booster vacuum pipe (2) by releasing the power brake booster vacuum rear pipe quick connect.




4. Remove and discard the power brake booster vacuum pipe clamp (1).
5. Remove the power brake booster vacuum pipe hose (2) from the vacuum port on the intake manifold.
6. Release the power brake booster vacuum pipe (3) from the retainer on the charge air cooler intake pipe.
7. Remove the power brake booster vacuum pipe assembly.

Installation Procedure




1. Install a new power brake booster vacuum pipe clamp (1) to the power brake booster vacuum pipe hose (2).
2. Install the power brake booster vacuum pipe hose to the vacuum port on the intake manifold.
3. Secure the power brake booster vacuum pipe clamp.
4. Install the power brake booster vacuum pipe (3) to the retainer on the charge air cooler intake pipe.




5. Install the power brake booster vacuum pipe quick connect (1) to the power brake booster pump.
6. Install the power brake booster vacuum pipe (2) to the power brake booster vacuum rear pipe quick connect.