51 11 156 Removing and Installing Front Bumper Trim

51 11 156 - Removing and installing front bumper trim





Important!
Risk of mixing up
Different screws fitted.





Release screws (1).





Release screws (1).





Release screws (1) on right and left on wheel arch trim (2).

Installation Note:
Make sure wheel arch trim (2) is in correct position.





Unclip bumper trim (1) at side at catch (2).





Important!
Do not damage bumper trim when pulling off.

Release bumper trim (1) at catches (2).
Pull bumper trim (1) with a second person helping towards front slightly; if necessary, disconnect plug connection for Park Distance Control (PDC) in area (3).
Remove bumper trim (1) towards front with aid of a 2nd person.

Installation Note:
Height adjustment, refer to Gap dimensions, body .