Harmonic Balancer - Crankshaft Pulley: Service and Repair

11 23 010 - Removing and installing/replacing vibration damper (S65)





Special tools required:
- 00 9 120 00 9 120 Torque Angle Measuring Dial
- 11 0 280
- 11 9 260 11 9 260 Holder
- 11 9 263






Necessary preliminary tasks:
- Remove fan cowl with electric fan Service and Repair.
- Remove A/C compressor drive belt Removing and Installing/Replacing Belt Tensioner for A/C Compressor.
- Remove alternator drive belt Service and Repair.





Release screws (1).
Remove cover (2) with belt pulley (3).






Note:
Engine or transmission removed.

Secure special tool 11 9 260 to flywheel (1).

Screw in special tool 11 9 263 with bolt (2) on crankcase.





Release screws (2).
Remove vibration damper (1).
Tightening torque: 11 23 1AZ. Mechanical Specifications






Note:
Engine or transmission installed.

Attach special tool 11 0 280 to vibration damper.

Support special tool 11 0 280 on holder (1).
Release all anti-fatigue bolts (2).

Installation:
Replace stress bolts.





Support special tool 11 0 280 on holder (2).
Tighten anti-fatigue bolts (1) with special tool 00 9 120.
Tightening torque: 11 23 1AZ. Mechanical Specifications





Assemble engine.