Cover For Left Or Right Rear Seat

52 25 405 - Replacing cover for left or right rear seat





Special tools required:
- 52 0 050





Necessary preliminary tasks:
- Remove padding (with cushion cover) Rear Seat, Normal, Electric





Lever out cover welt in marked area.
Disconnect all cable ties from wiring harness.

Installation:
Replace defective cable ties.





Release all retainers in marked areas.





Detaching cover and padding:
- Release all clips in designated areas
- Remove seat cover from padding
- Remove all remaining retainers from seat cover and/or padding





Replacing cover:
- Pull all trim wires out of seat cover
- If necessary, cut in take-up for trim wires of new cover
- Push trim wires into new seat cover





Installation:
Bend new retainer (2) closed with pliers 52 0 050 .
1. Padding
2. Clips
3. Trim wire in seat cover
4. Trim wire in padding
5. Seat cover