72 11 092 Removing and Installing/Replacing Rear Left or Right Seat Belts

72 11 092 - Removing and installing or replacing rear left or right seat belts





Necessary preliminary tasks:
- Remove left or right rear seat Removing and Installing/Replacing Left or Right Rear Seat
- Remove air outlet trim grille Removing and Installing/Replacing Front Air Outlet Trim Grille
- Remove left or right side section of backrest Removing and Installing/Replacing Left or Right Side Section on Rear Seat Backrest





Release screw (2).
Tightening torque 72 11 22AZ Specifications.

Installation:
Pin (3) determines the installation position and prevents the anchor fitting from turning.





Release screw (1).
Tightening torque 72 11 24AZ Specifications.
Remove reversing clip (2).





Release screw (1).
Tightening torque 72 11 21AZ Specifications.
Remove inertia reel unit (2).

Installation:
Inertia reel is coded to prevent incorrect installation.