Trunk / Liftgate Latch: Adjustments

51 24 004 - Adjusting rear lid lock





Prerequisite:
Rear lid must be correctly adjusted to fit; if necessary, adjust rear lid Adjustments.
For ideal adjustment, refer to Body gap dimensions .

Note:
The operation is shown on the left side; proceed in the same way for the right side.





Necessary preliminary tasks:
- Remove trim for support tube 54 37 ... Removing and Installing/Replacing Trim For Support Tube In Luggage Compartment on Left or Right





Slacken screws (1) until striker (3) can be moved.
Slide striker (3) in direction of arrow.
Tighten down screws (1).
Tightening torque 51 24 4AZ 51 24 Rear Lid Locks.
Check alignment of rear lid and striker, readjust if necessary.
If necessary, remove shims (2) or insert additional.