Replacing Right Engine Mount

22 11 001 - Replacing right engine mount (N54)





Necessary preliminary tasks:
- Secure engine in installation position Securing Engine In Installation Position
- Remove underbody protection
- Release tie rod 32 21 231 Replacing (Removing and Installing) Left or Right Tie Rod on steering gear
- Remove right V-strut (E93 only)





Release bolts (1).
Remove heat shield (2).





Release bolts (1) and remove engine mount towards front.
Tightening torque 22 11 1AZ Specifications.





Installation:
Make sure rubber (1) is correctly located.





Installation:
Rubber section (1) of engine mount must point to middle of vehicle.
Engine mount designations:
Right engine mount
- Even component number
Left engine mount
- Odd component number