65 12 072 Removing and Installing (Replacing) Amplifier (Top HiFi System)

65 12 072 - Removing and installing (replacing) amplifier (Top HiFi system)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove rear left side trim panel Removing and Installing Rear Left or Right Side Trim Panel





Release screws (1).
Release nut (2) and feed out amplifier (3) towards top.





Disconnect plug connection (1).
Pull off retaining plates (2) in direction of arrow and remove amplifier (3) from mounting.

Installation Note:
Make retaining plates (2) are correctly seated.





Installation Note:
Make sure retaining lugs (2) are correctly seated in mounting (1).





Replacement:
Carry out programming/coding Programming and Relearning.