51 16 165 Removing and Installing Complete Centre Console

51 16 165 Removing And Installing Complete Centre Console







Necessary preliminary tasks:
- Remove trim for storage compartment







IMPORTANT:
- Read and comply with notes on handling wiring harnesses and cables.
- Switch off ignition before disconnecting plug connections.







NOTE: Seats are shown removed for purposes of clarity.







Remove rear cover (1) from centre console (2) towards top.
Disconnect plug connection underneath.







Release front screws (1).
Tightening torque 51 16 16AZ.
Unlock and disconnect cable (2).







Release rear nuts (1).
Tightening torque 51 16 16AZ.

Release screw (2).
Tightening torque 51 16 17AZ.
Raise centre console (3) and unlock and disconnect plug connections underneath.

NOTE: Height of fastening point can be regulated by compensating bush underneath screw connection for centre console.







Unclip cable guide (1) from centre console (2).
Raise centre console (2) and unlock and disconnect plug connections on underside.
Remove centre console (2).

���T: