Flywheel: Service and Repair

11 22 000 - Removing and installing/replacing flywheel (N62/N62TU)






Special tools required:





Necessary preliminary tasks:
- Remove automatic transmission. 24 00 023 Removing and Installing Automatic Transmission (GA6HP26Z)
- Remove manual transmission.
- Remove clutch.





Automatic transmissions only:
Block flywheel (1) with special tools 11 9 260/ 11 9 263/ 11 9 264.
Unfasten flywheel screws.
Remove flywheel (1).

Installation:
Clean threads on flywheel screws in crankshaft.
Flywheel (1) is secured with an alignment pin.
Fit flywheel (1).
Fit new flywheel screws.
Tightening torque 11 22 1AZ [1][2][3]11 22 Flywheel.





Manual transmissions only:
Block flywheel (dual-mass) with special tools 11 9 260/ 11 9 262/ 11 9 263.
Release flywheel screws with special tool 11 4 180.

Installation:
Flywheel (1) is secured with an alignment pin.

Important!
Do not use screw locking varnish.

Tightening torque 11 22 1AZ [1][2][3]11 22 Flywheel.