Removing and Installing/Replacing Drive Belt (Elastobelt) for A/C Compressor
11 28 050 - Replacing A/C compressor drive belt with belt tensioner (N62/N62TU)
Special tools required:
- 11 3 340
Necessary preliminary tasks:
- Remove alternator drive belt Replacing Alternator Drive Belt
- Remove engine splash guard.
Note:
If the drive belt is to be reused:
Mark direction of travel and reinstall drive belt in same direction of travel.
Pretension belt tensioner slowly and carefully with a Torx socket as far as it will go and secure with special tool 11 3 340.
Remove drive belt.
Important!
If contaminated with hydraulic fluid: Replace drive belt.
Put on the drive belt.
Remove special tool 11 3 340.
Installation:
Check that drive belt is correctly positioned on pulleys.