51 12 801 Removing and Installing/Replacing Holder For Rear Left or Right Bumper

51 12 801 - Removing and installing/replacing holder for rear left or right bumper





Necessary preliminary tasks:
- Remove rear bumper trim





E93 only:
If necessary, release aerial/antenna holders (1 and 2) from holder (3).

Installation:
If necessary, replace faulty aerial/antenna holders (1 and 2).





Release screws (1 and 2).
Release nuts (3) and remove bracket (4).

Installation:
Make sure lugs (5) of underbody panelling run into guides on holder (4) at bottom.





Replacement:
- Modify sheet nuts (3)
- Replace foam seal (4)

Installation:
Catches (1) and guides (2) must not be damaged.
If necessary, replace faulty metal nuts (3).