Sunroof / Moonroof Motor: Service and Repair

67 61 005 - Replacing drive with gear (front) for actuating slide/tilt sunroof





Necessary preliminary tasks:
- Remove roof switch cluster Removing and Installing/Replacing Roof Switch Centre





Note:
Secure drive with gear for actuating slide/tilt sunroof (3) against falling out.

Unfasten plug connection (1) and disconnect.

Release screws (2), tightening torque 54 13 1AZ 54 13 Electric Components of Sun Roof.

Note:
Screws (2) are microencapsulated.

Remove drive with gear for actuating slide/tilt sunroof (3).





Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt sunroof (2) exactly in gear teeth (3).





Installation:
- Initialize slide/tilt sunroof Testing and Inspection