72 11 033 Removing and Installing/Replacing Front Left or Right Seat Belt

72 11 033 Removing And Installing/Replacing Front Left or Right Seat Belt







Necessary preliminary work:
- Remove panel for door post







Move backrest to full rearward position.
Unclip release tab (2) for belt anchor fitting trim (1) with plastic wedge.







Release screw (1).
Tightening torque: 72 11 2AZ.
Remove anchor fitting (2).

Installation note:
Make sure anchor fitting is correctly seated on seat mechanism pin.







Release screws (1).
Tightening torque: 72 11 4AZ.
Remove deflector bar (2).
Release screw (3).
Tightening torque: 72 11 3AZ.
Set down belt deflector with belt (4).







Release screw (1).
Tightening torque: 72 11 1AZ.
Remove automatic reel (3).

Installation note:
Coding (2) of automatic reel must be seated in body opening.







Installation note:
Free spaces of (A) and (B) from the seat belt strap to the guide funnel must be of the same size.

{�;:

]z�;: