51 47 000 Removing and Installing/Replacing Front (Inside) Left or Right Entrance Cover Strip

51 47 000 Removing And Installing/Replacing Front (Inside) Left Or Right Entrance Cover Strip

Special tools required:







Operations on right side analogous to side shown.

Use graphics in a mirror-inverted way.







IMPORTANT: Do not raise entrance cover strip (1) over entire length simultaneously.

E84 only:
clipped 3 times(2).

Unclip entrance cover strip (1) from clip (2), starting from the rear and moving forward, using special tool 00 9 317.







If necessary lift clip (1) from floorplate (2) and clip on entrance cover strip.

E84 only:
clipped 3 times(1).







Installation:
If necessary, replace faulty clips (1) on entrance cover strip (2).

E84 only:
clipped 3 times(1).