51 11 156 Removing and Installing Front Bumper Trim

51 11 156 - Removing and installing front bumper trim





Necessary preliminary tasks:

- Remove cover for headlight washer system 51 11 ... Removing and Installing/Replacing Cover For Headlight Washer System on Left on left and right





Remove seal in area (1).
Release screws in area (1).





The right side is removed in the same way as the left side.
Release screws (1).





Release screws (1).





The right side is removed in the same way as the left side.
Lift off wheel arch cover (1) in upper area.
Unfasten screws (2).





The right side is removed in the same way as the left side.
Unclip bumper trim (1) in area (2) in direction of arrow.
Pull bumper trim (1) forwards slightly and disconnect plug connections.
Remove bumper trim (1) straight forwards with a 2nd person helping.