51 71 080 Removing and Installing/Replacing Heater Bulkhead

51 71 080 - Removing and installing/replacing heater bulkhead





Necessary preliminary tasks:
- Remove microfilter for passenger compartment ventilation Replacing Microfilter for Interior Ventilation





Unclip retainers (1) and feed cable out of cable duct.





Release screws (1) and remove microfilter housing towards front.

Installation:
Seals on microfilter housing must not be damaged or missing.





Detach rubber strip (1).
Release locks (2) and pull side trim forwards a little.





Remove screws (1) and (2).
Lift out heater bulkhead.