Removing and Installing / Replacing Vent Hose for Active Stabilizer (Front)

37 10 005 - Removing and installing/replacing vent hose for active stabilizer (front)





Necessary preliminary tasks:
- Remove front assembly underside protection Removing and Installing/Replacing Front Underbody Protection





Do not release pressure relief valves (1) and (2).
Pull filter line (3) out of Y-piece at marked position (see arrow).
Filter line can be removed by sliding back the protruding collar on the Y-piece.





Vent hose:
Withdraw seal plug (1) from front axle carrier.
Remove vent line with filter from front axle carrier.