Windshield Washer Reservoir: Service and Repair

Replacing Fluid Reservoir For Windshield Washer System


Necessary Preliminary Tasks:
- Remove windshield washer pump
- Remove level switch for windshield washer system.


Version with headlight cleaning system:



Unlock plug connection (1) and disconnect.
Unlock hose (2) and detach from washer pump of headlight cleaning system.
Installation:
- Make sure hose (2) is laid without kinks.

All:
Release screw (3).

Feed out fluid reservoir for windshield washer system (4) and remove in direction of arrow.

Installation:



- Make sure fluid reservoir for windshield washer system (1) is correctly seated in guide (2).

Version with headlight cleaning system:



Withdraw washer pump of headlight cleaning system (1) in direction of arrow.
Installation:
- Replace sealing ring and strainer in washer pump.
- Coat sealing ring of washer pump with antiseize agent.

All:
Remove cover for windshield washing reservoir (2) and pull out strainer underneath.