Removing and Installing/Replacing Left Headlight Vertical Aim Adjuster

67 16 011 Removing and installing/replacing left headlight vertical aim adjuster (xenon headlight)






Warning!
Xenon headlights: Danger to life due to high voltage! Therefore disconnect xenon headlights from voltage supply.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.






Necessary preliminary tasks:
- Remove front wheel






Unlock fasteners (1) by turning counterclockwise through 180 ° and fold up cover�(2) in direction of arrow.






Lift locking bracket (1) out of mounts (2) and fold down as illustrated.
Feed out cover�(3) in direction of arrow and remove.






Release screws (1).
Feed out headlight vertical aim adjuster (2) in direction of arrow, unlock plug connection�(3) and disconnect.
Remove headlight vertical aim adjuster (2).






Installation:
Feed ball head (1) of headlight vertical aim adjuster (2) in direction of arrow into mounting�(3).
Gripping the reflector makes it easier to feed in the ball head.
Make sure ball head (1) is exactly seated in mounting (3).






After installation:
- Adjust headlight